Concrete Garage Floors in Elkton, MD
For Elkton homeowners building a new garage or replacing a cracked, settling garage floor.
New garage going up in Elkton? We pour the floor at 4 inches or thicker, and a recent 20 x 20 floor came to $3,700.
Why Customers Trust Tidewater
- MHIC Licensed #165168
- Insured — $1M/$2M
- 3-person crew
- Roughly 200 jobs completed
Garage Floor Pricing in Elkton
Garage floor pricing in Elkton starts around $9.25 per square foot at a standard 4-inch thickness. A thicker slab for heavier use adds to that starting rate, and every job gets a formal quote after we see the site.
A Recent 20 x 20 Garage Floor
A recent 20-by-20-foot garage floor, 400 square feet poured at 4 inches, came to $3,700, or about $9.25 per square foot. Garage floors are one of the services we keep pouring through the winter months.
- Footprint
- 20 × 20 ft garage
- Area
- 400 sq ft
- Thickness
- 4 in
- Price
- $3,700
Choosing the Right Slab Thickness
Slab thickness for a garage comes down to load. 4 inches handles everyday passenger vehicles in most residential garages, while a heavy truck, a vehicle lift or regular equipment storage usually calls for 5 to 6 inches with added reinforcement. Finishing a basement too? Our Basement Floors page covers that job.
Garage Slab Requirements in Elkton
Garage slab requirements in Cecil County start with the weather. The county’s building code rates the area’s weathering potential as severe, the category where the residential code calls for air-entrained concrete in garage floor slabs. Air entrainment puts tiny air bubbles in the mix, which gives water room to expand when it freezes. It’s a fair question to ask on any garage floor quote you’re comparing.
Cecil County’s Permits & Inspections Division, at 200 Chesapeake Blvd in Elkton, issues building and driveway permits in the county.
- Frost line
- 32 in
- Weathering
- Severe
- Permits
- Cecil County Permits & Inspections200 Chesapeake Blvd, Elkton
Serving Elkton and Cecil County, MD
Elkton is the county seat of Cecil County, the same county as our home base in Earleville, which makes it one of the shortest drives of any city we cover.
Garage floors around Elkton are often one piece of a bigger project, like a new detached garage or a worn slab replaced under an existing one. Either way, the price works the same: square footage at the thickness the garage needs.
For the full rundown on materials and options, see our Concrete Garage Floors page. Other work we do in the area is listed on our Elkton, MD page.
- Earleville, MDOur home base
- Elkton, MDCounty seat
What Our Customers Say
“First rate experience. Melvin and his crew were very thorough, fast and clean.”
Frequently Asked Questions
Do you pour garage floors in Elkton, MD?
Yes. Elkton is in Cecil County, the same county as our base in Earleville, MD.
Can you replace an old garage floor in Elkton, or only pour new ones?
Both. Tell us whether the old slab needs to come out first, and we'll include that in the quote after we see it.
Do garage slabs in Elkton need air-entrained concrete?
Yes. Cecil County's building code requirements call for air-entrained concrete in garage floor slabs, which helps the slab handle freeze-thaw cycles.
How much does a garage floor cost in Elkton?
Starting around $9.25 per square foot at 4 inches. A 20' x 20' garage floor recently came to $3,700.
How thick should a garage floor be?
4 inches is standard for most residential garages. Heavier use, like a lift or equipment storage, may need 5 to 6 inches.
Can a garage floor be poured in winter?
Yes. Garage floors are one of the services we keep scheduled through the cold months.
Ready to Get Your Project Poured?
Tell us what you’re building. We’ll quote it from real starting prices and confirm the schedule, including winter dates for foundations and floors.
