Concrete Driveways in Elkton, MD
For Elkton homeowners replacing a cracked or sunken driveway, or adding one to a new house.
A 5.5-inch minimum on every driveway, and the same per-foot price in Elkton as anywhere else we work.
Why Customers Trust Tidewater
- MHIC Licensed #165168
- Insured — $1M/$2M
- 3-person crew
- Roughly 200 jobs completed
Driveway Pricing in Elkton
Driveway pricing in Elkton starts around $10.62 per square foot at 5.5 inches, the minimum thickness we pour for any driveway. Extra thickness adds to the quote. The rate in Elkton matches the rate next door to our shop in Earleville, because we price the job and ignore the address.
A Recent 16 x 30 Driveway
A recent 16-by-30-foot driveway, 480 square feet at our 5.5-inch minimum, came to $5,100, or about $10.62 per square foot. Our concrete driveway cost guide shows how size, thickness and finish change that number.
- Size
- 16 × 30 ft
- Area
- 480 sq ft
- Thickness
- 5.5 in minimum
- Price
- $5,100
Why 5.5 Inches Is Our Minimum
5.5 inches is the thinnest driveway we’ll pour. A thinner slab is more likely to crack under years of vehicle traffic, and replacing a cracked driveway can cost far more than the extra concrete would have.
Driveway Permits and Weather in Elkton
Driveway permits in Cecil County come from the county’s Permits & Inspections Division in Elkton. The application asks for a site sketch showing where the driveway goes, the property lines, the house, setbacks and any other structures, so a property survey helps.
Cecil County’s building code also rates the area’s weathering potential as severe, which is the category where exterior concrete is expected to be air-entrained to survive freeze-thaw cycles.
- Frost line
- 32 in
- Weathering
- Severe
- Permits
- Cecil County Permits & Inspections200 Chesapeake Blvd, Elkton
Serving Elkton and Cecil County, MD
Elkton is the county seat of Cecil County, the same county as our home base in Earleville, which makes it one of the shortest drives of any city we cover.
Elkton driveways get the same quote they’d get in Earleville, built from the size, thickness and finish of the job. If you’re comparing quotes in town, ask each contractor what thickness they’re pricing, because that one number explains a lot of the spread.
For the full rundown on materials and options, see our Concrete Driveways page. Other work we do in the area is listed on our Elkton, MD page.
Want a decorative finish instead? See stamped concrete in Elkton.
- Earleville, MDOur home base
- Elkton, MDCounty seat
What Our Customers Say
“First rate experience. Melvin and his crew were very thorough, fast and clean.”
Frequently Asked Questions
Do you install concrete driveways in Elkton, MD?
Yes. Elkton is in Cecil County, the same county as our base in Earleville, MD.
Do I need a permit for a new driveway in Elkton?
Driveway permits in Maryland depend on the property and the work involved. We'll tell you what applies when we quote the job.
Who issues driveway permits in Elkton?
Cecil County's Permits & Inspections Division in Elkton issues driveway permits for the county.
How much does a concrete driveway cost in Elkton?
Starting around $10.62 per square foot at our 5.5-inch minimum thickness. A 16' x 30' driveway recently came to about $5,100.
What's your minimum driveway thickness?
5.5 inches. We don't pour a driveway thinner than that.
Does a stamped driveway cost more than plain concrete?
Yes, typically 20 to 50 percent more, because of the pattern and color work.
Ready to Get Your Project Poured?
Tell us what you’re building. We’ll quote it from real starting prices and confirm the schedule, including winter dates for foundations and floors.
